Wimes 803 mechanical installation manual *612*

Thorne & Derrick UK for LV-HV cable installation, jointing and specialist electrical products. Cablofil To Make Water Industry Splash Following Wimes Approval . Cablofil has become the first steel wire containment system to gain approval from WIMES (Water Industry Mechanical and Electrical Original manual Instruction Manual LKH Centrifugal Pump. 3 Installation Read the instructions carefully and pay special attention to the warnings! Always check the pump before operation. Double mechanical/flushed shaft seal: 1. Connect the inlet of the flushing liquid correctly. P/N 12-803, 12-803BP, & 12-804 Installation Instructions 199R7914-3 If the mechanical fuel pump is removed, seal the opening with a fuel pump block-off plate and gasket. follow the installation instructions as outlined below (refer to Figure 6). 1. Disconnect the ground cable from the certificates provided. Pressure Testing will be hydrostatic as defined in WIMES 8.03 Mechanical Installation - clause 6.4.2 Pressure (Strength) Testing with the pressure test criteria defined in the site specific Standard Product Datasheet; 8 Chrome Carbureted Fuel Pressure Regulator. If you are using a mechanical fuel pump, use the 12-803 regulator. If you are using an electric pump with a return line in the system, use the 12-803BP. Instructions for Part# 12-803. Holley Fuel Systems Chart. If you are using a mechanical fuel 20.5 MAINTENANCE AND OPERATING INSTRUCTIONS 64 APPENDIX ONE-LIST OF STANDARDS 67 iv Edition 1 -2004. Specification 034 mechanical and electrical engineering works. The Specificationcovers materials necessary to form acomplete installation, includingsuch tests, adjustments and WIMES 8.05 6.1.18 O & M Manuals 1. Page 19. O & M manuals shall be provided in accordance with the Purchasers Particular Specification. The reference for this Specification shall be as specified on the DATA SHEET. 6.1.19 Training 1. Training shall be provided in accordance with the Purchasers Particul