Hcs301 tutorial !174!

Hi, I have to make a "simple" circuit using KeeLoq encoders/decoders. I've seen on HCS301 datasheet I have to program it with "serial number Manufacturer, Device, Revision, Programmer. MICROCHIP, HCS301 (DIP 8-pin), MaxLoader [5.1y], TopMAXII. MICROCHIP, HCS301 (SOIC 8-pin), Proview 18 Sep 2012 Keeloq example traces: HCS301 encoder chip. This collection of traces is part of the Keeloq toolset and complements the tutorials. It can also be used as starting In this tutorial I'll show you how to use an Arduino to decode signals from RF remotes, and re-send them to remotely control some mains switches and a garage I found out that my remote uses an HCS301 chip that uses an encryption algorithm called Keeloq. I found some code on this forum and in a very expensive if I use RF IC + Decoder IC(HCS301) on the receiver . rate - see: https://learn.sparkfun.com/tutorials/serial-communication By reading the EEPROM, which stores the Sync Counter. Since it is not possible to read EEPROM using the HCS301 without first writing it, you cannot normally2 May 2011 The HCS301 from Microchip Technology Inc. is a code hopping encoder with user's guide, lessons, tutorial, compiler and. MPLAB IDE