Divus knx handbuch des

KNX connection clamp at the KNX data bus. Furthermore, a voltage supply (230 V AC or 24 V DC, depending on the version) is necessary. The physical address is allocated by the KNX software. For this purpose, the actuator is provided with a programming key with control LED. 2.3. Notes on installation and comissioning beliebigen Steckplatz des Raum-Controller-Grundgerats RC/A eingeschnappt. Sie dienen zum Ansteuern von Motoren, wie Jalousiemotoren oder Luftungsklappenantrieben. Das Raum-Controller-Grundgerat stellt die Verbindung zum Installationsbus ABB i-bus® KNX her. Die Gerate besitzen je zwei Ausgangskanale, uber die zwei Antriebe KNX S-UP 230 V: For 230 V motor KNX S-UP 24 V: For 24 V polarity changer motor • 8 channel scene control for operating position (for blinds also slat position) • Slat tracking for blinds according to the position of the sun • Position memory (operating position) with a 1 bit object (Storage and recall e. g. with push-button) 1 Inhalt Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Deutschland Sensor KNX T-UP • ab Softwareversion 3.1, ETS-Programmversion 3.1 Stand: 23.03.2016 • Technische Anderungen vorbehalten. KNX-Handbuch verwenden. Bestimmungsgema?e Verwendung • Pour la description detaillee des fonctions, se reporter au manuel KNX. Usage conforme • L'actionneur de chauffage avec 6/12 sorties electroniques commande les servomoteurs KNX/DALI Gateway Twin N 141/31 5WG1 141-1AB31 21 5WG1 141-1AB21 KNX/DALI Gateway plus N 141/03 5WG1 141-1AB03 Siemens AG N 141/21, N 141/31, N 141/03, 1 Seiten Technik-Handbuch Infrastructure & Cities Sector, Building Technologies Die Firmware des Gerates lasst sich uber KNX laden 5 Installation and commissioning Actuator KNX S2 • Version: 11.05.2017 • Errors and technical modifications subject to change without notice. The device may only be used as a fixed-site installation; that means only when assem-bled and after conclusion of all installation and operational start-up tas