15.1sy configuration guide +485+

CSCuu64279 A vulnerability in the Locator/ID Separation Protocol (LISP) of Cisco IOS Software running on the Cisco Catalyst 6500 and 6800 Series Switches and Cisco NX-OS Software running on the Cisco Nexus 7000 and Nexus 7700 Series Switches with an M1 Series Gigabit Ethernet Module could allow an unauthenticated, remote attacker to cause a reload of the vulnerable device.

[c3] CLI Book 1: Cisco ASA Series General Operations CLI Configuration Guide, 9.6 (Cisco, May 16 2017) www.cisco.com/c/en/us/td/docs/security/asa/asa96 configuration is automatically created when a switch is added to a switch stack and when no provisioned configuration exists. When you configure the interfaces associated with a provisioned switch (for example, as part of a VLAN), the switch stack accepts the configuration, and the information appears in the running configuration. For 3, Here is a guide that might help. There are a lot of features and optional settings . Release 15.1SY Supervisor Engine 2T Software Configuration Guide - Virtual Switching Systems (VSS) [Cisco Catalyst 6500 Thanks for answer, but in "Release 15.1SY Supervisor Engine 720 Software Configuration Guide " says that the implementation of MEC possible between servers - this configuration works, but only after reinstalling the transceivers in ports, ports are raised and everything works.Between the server and the switch operating on the VSS technology is configured with etherchannel protocol LACP. The Cisco Applied Intelligence team has created the following companion document to guide administrators in identifying and mitigating attempts to exploit this vulnerability prior to applying updated software: Identifying and Mitigating Exploitation of Cisco IOS Software RSVP Interface Queue Wedge Vulnerability Release 15.1SY Supervisor Engine 720 Software Configuration Guide; Cisco IOS Software Release 12.2SX. Catalyst 6500 Release 12.2SX Software Configuration Guide; Catalyst 6500 Release 12.2SXF and Rebuilds Soft